Hakko Electronics Monitouch V9 Series Troubleshooting Instructions Supplement

2-40 2. Local Mode Screen
6. Data transfer or comparison start
Check the storage information and press the [Start] switch.
During data transfer or comparison, the [Start] switch changes to [Transferring] and the
[Transferring data ... (Storage)] dialog is displayed.
7. Data transfer completed
On successful completion, the following message dialog is displayed. Press the [OK] switch.
* If any other message is displayed, refer to “Message Dialog Displayed during Data Transfer
(between V9 and Storage)” (page 2-42).
Data transfer or comparison start During data transfer or comparison
Data transfer or comparison completed

Hakko Electronics Monitouch V9 Series Specifications

General

Brand	Hakko Electronics
Model	Monitouch V9 Series
Category	Monitor
Language	English