Hameg CombiScope HM1508-2 Service Manual

87
Subject to change without notice
MANUAL ADJUSTMENT PROCEDURE HM1508-2
– Check that Settings Adjust menu is displayed.
– Press “Service” function key to call “Adjust Service” menu.
– Press “Factory” function key to call “Service Factory” menu.
– Press “User-
>Fact.” function key to save the software adjustment data – stored before in the user
memory – into a second memory called Factory for security purposes.
– Press REM (EXIT MENU) pushbutton to return to “Adjust Service” menu.
– Press REM (EXIT MENU) pushbutton to return to “Settings Adjust” menu.
– Continue with item 62.
61 Saving Software Adjustments

Hameg CombiScope HM1508-2 Specifications

General

Brand	Hameg
Model	CombiScope HM1508-2
Category	Measuring Instruments
Language	English