*#1
:-%
Owner’s Manual
90
OD / EFF (Overdrive / E ects) - continued
❼ PHASER - RATE
Adjusts the frequency speed.
e setting range is 0 to 127. e cycle becomes faster as the value increases.
❽ PHASER - DEPTH
Adjusts the depth of modulation.
e setting range is 0 to 127. e modulation becomes deeper as the value increases.
❾ PHASER - RESONANCE
Adjusts the resonance (feed-back) amount.
e setting range is 0 to 127. e resonance becomes greater as the value increases.
At higher values, the sound is modulated beyond normal recognition.
❿ PHASER - MANUAL
Sets the middle frequency of the phase eff ect.
e setting range is 0 to 127. e frequency becomes higher as the value increases.
⓫ PHASER - MIX
Adjusts the volume balance between the “dry” and the eff ect sound.
e setting range is 0 to 127. At 0, only “dry” is heard. e eff ect level becomes great-
er as the value increases. At 127 the ratio between the “dry” and the eff ect sounds
becomes 1:1.
⓬ PHASER - HPF
Controls the frequency range of the eff ect.
e setting range is 0 to 127. At 0 the eff ect is added to all frequencies. e eff ect is
added to the higher frequencies as the value increases.
Frequency
Level
Mix
Depth
Manual
Rate
Modulation
HPF
eect range
Phaser
is eff ect adds a twisting character to the sound by shifting phase.
❻❼❽❾
❿
⓫⓬
To Next Page
Loading...
Need help?
General
