Service instructions | 65Trophy Service instructions | 65Service instructions | 65
Mount the walking aid holder
Preparation
• Switch off the scooter with the ignition key.
Instructions
The following operations are required to mount the walking
aid holder:
Note! Suitable work area required!
• Remove the armrest on both sides from the backrest
frame.
• Mount with the two bolts on every side the walking aid
holder on the backrest frame.
Relevant article numbers
• 1001814 Walking aid holder
Tools used
• Allen key, 6 mm
1
110948-03-005
1
2
6
2
2
3
1
110948-03-009
6
To Next Page
Loading...
