Hantek DSO8000E Series User Manual

Getting Started Guide
DSO8000E Series HandHeld Oscilloscope User Manual 12
3.7.2 Install driver
Caution: You must install the driver before connect the device with Windows PC via USB cable.
1. Connect the A-Type Plug of USB cable to your PC’s USB port.
2. Connect the B-Type Plug of USB cable to DSO’s USB port.
3. New hardware is found.
4. New hardware search wizard starts.

Hantek DSO8000E Series Specifications

General

Brand	Hantek
Model	DSO8000E Series
Category	Test Equipment
Language	English