Hantek DSO8000E Series User Manual

Waveform Generator
DSO8000E Series HandHeld Oscilloscope User Manual 86
Generate Arbitrary waveform
9.2
User can edit arbitrary waveform directly under DDS interface for the device, or use DDS_ARB
software to generate a waveform file and load it again.
9.2.1 Edit Arb waveform by DDS_ARB
User can use DDS-ARB software to edit arbitrary waveform.
1. Install software
Please double click “Setup.exe” in Tools folder and install DDS-ARB software according to
installation wizard.
After DDS-ARB software installed successfully, you can see DDS-ARB icon on desktop.
2. Install driver
Power on and connect DSO8000E to PC via USB cable. Right click “Computer
Management->Device Manager” to install the driver.
3. The menu:
1) File: Save or open the .csv file.
2) Edit: Edit points and zoom in/out the display waveform.
3) Wave parameter: Set the parameter of waveform.
4) Display:Change the color of Background, XY Line, Curve, Cursor.

Hantek DSO8000E Series Specifications

General

Brand	Hantek
Model	DSO8000E Series
Category	Test Equipment
Language	English