Table 2-1 Model List of DSO8000E Series
DSO8000E Series oscilloscopes cover the bandwidths from 70MHz to 200MHz, and provide
the real-time and equivalent sample rates respectively up to 1GSa/s and 25GSa/s. In addition,
they have maximum 2M memory depth for better observation of the waveform details, and 5.6 inch
color TFT LCD as well as WINDOWS-style interfaces and menus for easy operation.
What’s more, the plenty menu information and the easy-to-operate buttons allow you to gain
information as much as possible in measurement; the multifunctional and powerful shortcut keys
help you save a lot of time in operation; the Autoset function lets you detect sine and square
waves automatically; the Probe Check Wizard guides you to adjust the probe compensation and
set the Probe option attenuation factor. By using these the methods the oscilloscope provides
(context-sensitive, hyperlinks, and an index), you may master all operations on the device in quite
a short time so as to greatly improve your efficiency in production and development.
Help System 2.2
This oscilloscope has a Help system with topics covering all of its features. You can use the Help
system to display several kinds of information:
General information about understanding and using the oscilloscope, such as Using the Menu
System.
Information about specific menus and controls, such as the Vertical Position Control.
Advice to problems you may come across while using an oscilloscope, such as Reducing
Noise.
Keep pressing a Function Menu button(including “SAVE/RECALL”, “MEAS”, “UTILITY”,
“CURSOR”, “CH1”, “CH2”, “MATH”, “HORI” and “TRIG”) for 3s to turn on the help file for the
function.
To Next Page
Loading...
Need help?
General
