Multimeter
DSO8000E Series HandHeld Oscilloscope User Manual 67
Chapter 7 Multimeter
About this chapter
This chapter provides an introduction to the multimeter functions of DSO8000E Series. The
introduction gives guides to show how to use the menus and perform basic measurements.
Connecting the Meter
Use the 4-mm safety banana jack inputs for the Meter functions: 10A , mA, COM,V/Ω/C.
Multimeter Operation Window
Figure 7-1 Multimeter operation window
Description
1) Measurement mode indictors:
DC: Direct electric measurement
AC: Alternating electric measurement
2)The symbol of Mutimeter current mode.
3) Manual/Auto range indictors, among which the MANUAL refers to measuring range in manual
operation mode and Auto means the measuring range in automatic operation mode.
4) The reading value of measurement.
5) The bar graph indictor.
6) DC or AC Measurement mode control.
7) Absolute /relative magnitude measuring control: The sign “||” expresses the absolute magnitude
measuring control and “ ” represents the relative magnitude measuring control.
8) Manually or automatically measuring range control.
To Next Page
Loading...
