10
HARDI CONTROLLER 5500
Start-up
When connecting the 39 pin
plug from the sprayer, note
the lock pal (A) clicks in
place to secure the plug in
the socket.
When disconnecting the
plug, the metallic pal must be
pushed back before the plug
is pulled out.
After connecting the plugs,
the power is turned on at the Spray Box. Model, software version number,
number of sections and size are displayed briefly. At initial start up, Control-
ler also promts for input of time and date. [Set clock to enable register].
Press to continue.
Menu 2.4 Set clock
If the Controller prompts for date and time, [Set clock to enable register]:
This must be done before the Controller is put into operation for the first
time, otherwise no start and stop time will be recorded in the registers.
NOTE: If no prompt, the dealer may already have done this.
Press .
Press to menu [2 Setup].
Press .
Press to menu [2.4 Set clock].
Press to enter menu [2.4.1 SET CLOCK].
Now you can choose between 24 hour or 12 hour clock with .
Press .
Set minutes, hours, year, month, day with and .
Press to confirm.
Press and hold to exit menu system.
To Next Page
Loading...
Need help?
General
