Hardi 5500

17
HARDI CONTROLLER 5500
2.1.5.2
WORK RATE
Show here
2.1.5.1
WORK RATE
Show above
The following menu explanations assume you have mastered the general
keystrokes and you can “find your way” to the specific menu.
If this is not so, please re-read “ Navigation keys” and “General keystrokes
and menu system”.
Menu 2.1 Display readout
It is possible to freely choose which function is to be shown on the 3
rd
or 4
th
line of the display. Choose the submenus of menu [2.1 Display readout].
Menu [2.1 Display readout]Menu [2.1 Display readout]
Menu [2.1 Display readout]Menu [2.1 Display readout]
Menu [2.1 Display readout]
Choose a submenu e.g. menu [2.1.5 Work rate].
Press to confirm.
Use or to choose which line is to show data.
Press to confirm.
To show the work rate in 4
th
line.
To show the work rate rate in the 3
rd
line of display.
Choices are listed as follows.
Display text Description
[2.1.1 Program: Actual] Programmed and actual application rate
[2.1.2 Flow rate] Flow rate out to the boom
[2.1.3 Optional sensor] There are 8 sub-choices
[2.1.4 Time] Actual time
[2.1.5 Work rate] Rate shown in hectares per hour
[2.1.6 Volume rate] Actual rate in Litres per hectare
[2.1.7 Tank contents] Main tank contents
[2.1.8 Speed] Driving speed
[2.1.9 Volume: Area] 2 readouts on the same line
[2.1.10 Active boom size] Active boom size including end nozzle.