15
HARDI CONTROLLER 5500
Menu 1.3.1 Register readout and selection
Register 1 to 98 can be used for individual areas.
Register 99 is a tally of register trips 1 to 98. They are identified with a
number and it is also possible to name them. The data is memorised when
the system is switched off.
To read the data in the active register:To read the data in the active register:
To read the data in the active register:To read the data in the active register:
To read the data in the active register:
Shortcut .
Press and hold until menu [1.3.1 Register XX] is shown.
Press to enter register.
Press to scroll through the data.
Press and hold to exit the menu system.
To reset register:To reset register:
To reset register:To reset register:
To reset register:
Press and hold until the countdown has ended.
Reset of a register can be stopped if the key is released before count-
down has ended.
To change the register:To change the register:
To change the register:To change the register:
To change the register:
Shortcut .
Press and hold until menu [1.3.1 Register XX] is shown.
Press or to change the register.
The number is shown on the 1st line and if present, the name on the 4th line.
Press . If necessary, the register can be reset.
Press until the countdown has ended.
Press and hold to exit the menu system.
XX
1.3.1
SELECT REGISTER
Register XXXXX
To Next Page
Loading...
