Hardi 5500

27
HARDI CONTROLLER 5500
Calculating PPU !
3.2.4.1
CIRCULATION
Flow constant
3.2.4.1
FLOW CONSTANT
XXX.XX PPU
3.2.4.2
CALIBRATION CIR.
XXX.XX l/min
Menu [3.2.4 Circulation]Menu [3.2.4 Circulation]
Menu [3.2.4 Circulation]Menu [3.2.4 Circulation]
Menu [3.2.4 Circulation]
The following is only relevant for sprayers equipped with circulation liquid
system. The circulation type liquid system has to be set up from the Ex-
tended menu at installation. The HARDI Service centre does this.
See menu [3.2 Flow calibration] for calibration of “Flow 1”. Flow constant
from “Flow 1” is shown.
“Flow 1” is used as a reference when calibrating circulation flow, “Flow 2”.
Method
1. Ensure all boom sections and end nozzles are closed.
2. Go to menu [3.2.4.2 Calibrate circulation].
3. Press . The automatic calibration is initiated and line 4 will show:
4. When finished the menu returns to [3.2.4.1 Flow constant] to show the
new PPU.