5
HARDI CONTROLLER 5500
If used on a mistblower, volume applied can also be set up as “Unit Canopy
Row”. Tree width and height can be changed on the go.
Functions include correct area with closure of up to 7 spray boom sections,
alarm functions for volume rate, minimum tank contents, speed min./max.
and possibility for audio/visual alarm.
The Spray Box has intergrated controls for the spray functions, foam
marker, end nozzles and two electric valves.
The transducers utilised are chosen for long service life and good signal
quality. The speed and flow transducer has a diode built into the housing to
aid servicing. As the wheel or rotor turns, the diode will flash thereby indicat-
ing it functions.
The Controller is also compatible for Variable Rate Application and is
prepared for communication with Precision Farming tools.
Data dump of registers and configuration to a personal computer is possi-
ble.
The system has a non-volatile memory with no battery which simplifies
storage. All parameters in the menus are saved in the Controllers memory
and are not lost when the power is disconnected.
The components are rain and dust proof and have been developed to last
many years under agricultural conditions.
Optional transducers include pressure, revolutions and area meter. Other
options include a 12 Volt printer and a foot operated remote ON/OFF for the
Main ON/OFF.
To Next Page
Loading...
Need help?
General
