6 - Maintenance
151
Wide angle PTO for both tractor and sprayer
μ
ATTENTION! If your sprayer has the TWIN air assistance included, is changed to .
Greasing the Pump
The pump is greased as follows:
• Factory greased:
300 g grease into each lubrication point (A).
• Normal operation:
Greasing every 50 hours with 30 grams of grease into each
lubrication point (A). See also the section“50 Hours Service”
in this book.
• After disassembling the pump (diaphragm renewal, etc.):
Greasing with 200 grams of grease into each lubrication
point (A).
μ
ATTENTION! In order to prevent excessive wear, it is important to
use a recommended lubricant! See the section “Recommended
Lubricants” in this book.
μ
ATTENTION! The pump MUST be stopped during greasing!
A-50
A-50B-50 C-50C-50
A-50
A-50
To Next Page
Loading...
