3 - Description
74
Night Spraying Light
Floodlights (A) are mounted on the spray boom, and they are positioned
to illuminate both boom wings when spraying at night.
The work light lamp (B) is also mounted to the railing of the platform
above the valves. This lamp is positioned to light up the TurboFiller and
the valve system.
The boom lights (A) are turned on/off on the controller in the tractor.
The work light (B) is turned on of by activating a switch (D) inside the left
side cover (C). Open the cover to turn on the light.
μ
ATTENTION! It is recommended to switch OFF the rear working
lights of the tractor in order to save power consumption and to
avoid reflection. Power supply is via the 2-pin socket - for more
information, see the section “Technical Specifications”.
Turn OFF all work lights and night lights, when driving on public
roads!
If the lights do not function, check the cable connections (see
“Technical Specifications” in this book), and check if the fuses are
blown.
Check frequently that the lights are clean and without damages.
Clean with a dry cloth if needed. Replace if broken.
To Next Page
Loading...
