EasyManua.ls Logo

Hardi HC 8500 - Page 45

Hardi HC 8500
184 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 - System setup
4.19
9. Antenna Settings:
Press the button to change the antenna
settings for the Selected Vehicle in the drop
down menu.
10. Enter Distance from Antenna location to Rear
Axle:
A. Choose “In Front” or “Behind” from the
Rear axle.
B. Press to type in the measured
value for the GPS Front/Back Offset
from the vehicle.
11. Enter Distance from Antenna location to
Center line:
A. Choose “Left” or “Right” from the
Center line.
B. Press to type in value.
Operating Configuration Wizard: Vehicle
Select Vehicle
JD 4630
Offsets
Antenna Location from Rear Axle
Antenna Location from Centerline
Antenna Height from Ground
Rear Drawbar
Rear Lift Arms
Front Lift Arms
Vehicle Offsets: JD 4630
Antenna
Hitch
Enter Distance from Vehicle References to the Antenna
Antenna Location from
Rear Axle
Antenna Location from
Centerline
Antenna Height from
Ground
In Front
Left
Vehicle Offsets: JD 4630
Antenna
Hitch
Enter Distance from Vehicle References to the Antenna
Antenna Location from
Rear Axle
Antenna Location from
Centerline
Antenna Height from
Ground
In Front
Left

Table of Contents

Related product manuals