4 - System setup
4.18
6. Enter Vehicle Information:
A. Press the “Make” to type in the
vehicle name.
B. Press the “Model” to type in
the vehicle model.
C. Press to confirm.
7. Enter distance from Rear Axle of the tractor to
the following locations:
• “Rear Drawbar” for a trailer sprayer.
• “Rear Lift Arms” for a lift sprayer.
ATTENTION! The option “Front Lift Arms” is
not used for HARDI® sprayers.
Trailer as example:
A. Chose “Rear drawbar”.
B. Press to type in value.
C. Press .
8. Vehicle Name:
A. Press the button to change the
vehicle name, if necessary.
B. Press to confirm selection.
Vehicle Wizard: Make and Model
Make
Model
Enter Vehicle Information
Vehicle Wizard: Attachment points
Enter Distance from Rear Axle to the following Locations
Rear Drawbar
Rear Lift Arms
Front Lift Arms
Vehicle Wizard: Vehicle Name
Enter Vehicle Name
JD 4630
To Next Page
Loading...
Need help?
General
