EasyManua.ls Logo

Hardkernnel ODROID-C2 - Page 64

Hardkernnel ODROID-C2
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59 ODROID C2 USER MANUAL
Ensure the adapter is recognized by the ODROID-C2, by obtain-
ing the USB information of the adapter using the lsusb command:
$ lsusb
...
Bus 001 Device 005: ID 0a12:0001 Cambridge Silicon Radio, Ltd Blue-
tooth Dongle (HCI mode)
...
While some of the required software modules may already exist
in your ODROID-C2’s installed image, it is helpful to install the follow-
ing additional modules and utilities, using the following commands:
$ sudo apt-get install bluez-dbg bluez-tools bluez-hcidump
$ sudo apt-get install bluewho blueman python-bluetooth
Some of them could be used to debug your setup, if you use
a non-Hardkernel Bluetooth adapter. You can check the Bluetooth
adapter’s support for additional features by examining the dmesg logs,
using the following command:
$ dmesg | grep Blue
[ 0.180204] Bluetooth: Core ver 2.18
[ 0.180236] Bluetooth: HCI device and connection manager ini-
tialized
[ 0.180250] Bluetooth: HCI socket layer initialized
[ 0.180261] Bluetooth: L2CAP socket layer initialized
[ 0.180284] Bluetooth: SCO socket layer initialized
[ 3.945426] Bluetooth: RFCOMM TTY layer initialized
[ 3.949664] Bluetooth: RFCOMM socket layer initialized
[ 3.954786] Bluetooth: RFCOMM ver 1.11
[ 3.958468] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.963723] Bluetooth: BNEP lters: protocol multicast
[ 3.968896] Bluetooth: BNEP socket layer initialized
[ 3.973814] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.979677] Bluetooth: HIDP socket layer initialized
You can then check the list of the installed Bluetooth modules:
$ dpkg -l | grep blue
ii blueman ... armhf Graphical bluetooth manager
ii bluez ... armhf Bluetooth tools and daemons
ii bluez-alsa:armhf ... armhf Bluetooth ALSA support
ii bluez-cups ... armhf Bluetooth printer driver for CUPS
ii libbluetooth-dev ... armhf Dev. les for BlueZ Linux Bluetooth lib
ii libbluetooth3:armhf ... armhf Library to use the BlueZ Linux BT stack
ii libgnome-bluetooth11 ... armhf GNOME Bluetooth tools - support library
With the positive signs observed in the output so far, we can
Chapter 4

Table of Contents