Need help?Do you have a question about the Hardy Process Solutions HI 6600-EIP and is the answer not in the manual?
General| Communication Protocol | EtherNet/IP |
|---|---|
| Excitation Voltage | 10 VDC |
| Power Supply | 24V DC |
| Enclosure Rating | NEMA 4X/IP66 |
| Operating Temperature | -10°C to 50°C |
| Humidity Range | 0 to 95% non-condensing |
| Weight | 0.5 kg |
Details core specifications for WPM and HGM modules, including channels and resolution.
Explains key features like Hardy Process Toolbox, C2 Calibration, and WAVERSAVER.
Essential safety warnings and general precautions before installation.
Information on supplying DC power to the Gateway Module and WPMs.
Guides on wiring load cells to the Weight Processing Modules.
Explains how to configure the system using the Webserver or the front panel display.
Covers system discovery, channel identification, naming, ordering, deleting, and replacing modules.
Details on using the USB port for saving, restoring, and copying configuration data.
Describes C2/eCAL and traditional Hard Calibration methods.
Configuring Ethernet TCP/IP, including IP addresses and DHCP settings.
Details on setting IP addresses, subnet masks, gateway, and DNS.
Configuring Modbus TCP and Modbus-RTU communication.
Steps for configuring the Profibus-DP communication protocol.
Procedures for changing security settings and passwords.
Explanation of module indicator lights and common error messages.
To Next Page
