76
11. Press either the
+
or
–
button to make an INITIAL DELAY
setting.
This setting controls the amount of time that elapses
before the rst capture in the sequence.
12. Press to select DELAY.
13. Press either
+
or
–
to make a DELAY setting.
This setting controls the amount of time between each
capture in the sequence.
14. Press to select COUNT.
15. Press either
+
or
–
to make a COUNT setting.
This setting controls the number of captures in the
sequence.
16. Press OK to conrm all the settings.
17. The unit is now ready for a sequence start. Note that the
MENU/EXIT button now diplays START instead:
18. Press START to set the sequence running.
19. Note that the EXIT button now displays STOP. The sequence
can be stopped at any time by pressing this button and the
standard menu display returns.
1817
15 16
13 14
11 12
19
To Next Page
Loading...
