11
H4D
Metering method
Aperture setting
Shutter speed
Exposure method
Capture counter
Exposure compensation
Focus assist
Warning triangle
Flash warning
This overview illustrates the
functions and features most
commonly needed when shoot-
ing, and how they are distribut-
ed on the three displays.
For example, aperture and shut-
ter settings appear in both the
view nder and on the grip dis-
plays in normal mode but can
also appear on the digital cap-
ture unit display if set to do so.
ISO settings appear on the grip
and on the digital capture unit
display but not on the view nd-
er display.
Also, changing settings are mir-
rored throughout. For example,
if you change the ISO setting on
the grip, the change will auto-
matically appear on the digital
capture unit display. Also, in this
particular case, you are able to
change the ISO setting on the
digital capture unit which will be
mirrored on the grip display.
However, some settings, aper-
ture and shutter settings for ex-
ample, are only changed on the
grip but are nevertheless mir-
rored in the view nder and digi-
tal capture unit displays.
Please note that the grip and digi-
tal capture unit displays also il-
lustrate many more specialist set-
tings. These are covered in detail
further on in this manual.
Display information
− overview
Metering method
Aperture setting
Shutter speed
Exposure method
Capture counter
ISO
White balance
Flash indication
Focus
Drive
EV
Battery status
.....optional.....
Histogram
VIEWFINDER INFORMATION
GRIP LCD INFORMATION
To Next Page
Loading...
