2
1
1
2
Camera
The
Camera
setting automatically corresponds to an H4D body in
normal use. However, whenthe digital capture unit is attached to
a large format/view camera then other settings must be manually
made. See separate section in this manual for further informa-
tion.
About
Hasselblad regularly releases updates to the rmware of the digi-
tal capture unit. These updates not only improve the e ciency
but also often add new features. The About box will tell you which
rmware version is present so you can see if you have the latest
(which can be downloaded from the Hasselblad website). The se-
rial number is also displayed in case Hasselblad Support need to
know it for any eventual problem solving.
The About box also shows the focus calibration ID (which must
match the information on the grip display under 'System Status'
to obtain the optimum performance). Each digital capture unit
is carefully adjusted to match the corresponding camera body,
which in turn produces the matching veri cations respectively. If
you want to use di erent digital capture units with di erent cam-
era bodies, please refer to a Hasselblad Service Center for more
information.
To obtain the About information:
1. Select
MAIN MENU > SETTINGS > ABOUT
. (See also Navigating
the Menu System or details about how to nd this setting.)
2. Press to open the About dialog, which shows the serial
number and rmware version. When you are done reading
the information, press the menu (
EXIT
) button to return to the
SETTINGS
menu. Either move on to another setting by using
the navigator button or press the menu (
EXIT
) button again
to exit the menu system.
Default
The
DEFAULT
setting will reset all custom settings you have made
back to the original default / factory settings.
To reset all settings:
1. Select
MAIN MENU > SETTINGS > DEFAULT
.
2. Press the
OK
button and then the
EXIT
to return.
To Next Page
Loading...
