99
H4D
1 2
3 4
5
6
7
8
9
10
11 12
Self timer setting
The Self timer function is set in the following manner:
1) Press the MENU button on the grip.
2) Turn the front control wheel until Self Timer appears.
3) Press ENTER (ISO/WB button) on the grip.
4) Turn the front control wheel to access the options, that are:
Delay
Mirror sequence
Mirror Up / Mirror Goes Down
(A drop shadow will be displayed beneath the selected symbol,
for example
)
5) When Delay is highlighted - - turn the rear control wheel
to choose a delay range from 2 - 60s in 1s intervals.
6) Turn the front control wheel again to choose Delay / Mirror
Up, Mirror Up/ Delay sequence -
. When highlighted
turn the rear control wheel to choose.
Delay / Mirror Up sequence =
Delay for set amount of time — mirror raised — capture
made.
Mirror Up/ Delay sequence =
Mirror raised — delay for set amount of time — capture
made.
7) Turn the front control wheel again for
Mirror goes down / Mirror remains up -
.- choice.
Turn the rear control wheel to choose.
Mirror goes down =
Mirror returns to its normal position and the camera is made
ready for the next capture.
Mirror raised =
Mirror remains in raised position. No image is visible in the
view nder until M UP button pressed.
8) Press On (AF button). Note that this now reads O ff and the
line of text at the bottom of the screen reads ‘Self timer on’.
9) Press SAVE (ISO/WB button) to save the setting.
10) Press ENTER (ISO/WB button) again from the Self Timer
screen to activate the function.
11) Click On (AF button).
12) Half-press the shutter release button to standby mode for this
function (press the shutter release button again (full press)
for activation) or full-press the shutter release for immediate
activation.
‘Delay’ highlighted with
drop shadow. 10 seconds
chosen.
Mirror sequence highlight-
ed. ‘Delay rst, then mirror
raised’ chosen as option.
Mirror down /up highlight-
ed. ‘Mirror down after cap-
ture’ chosen as option.
MENU
To Next Page
Loading...
