77
2 frames –
255 frames
2 seconds −
1 hour
INTERVAL
By using the interval setting, you can allow the camera to
take a series of captures automatically over a set period. This
is often required for time and motion studies, security surveil-
lance, nature study, etc. The exposure and focus settings (Man-
ual or Auto) will be according to the camera settings at the time
of capture.
INTERVAL SETTING
1) Press MENU on grip.
2) Turn the Front scroll wheel until Interval appears.
3) Press
ENTER
.
4) Turn the Front scroll wheel to access the options, that
are:
Number of captures (the number of captures required)
Interval duration (the time interval between each capture)
(The selected feature symbol is indicated by a drop shadow)
5) In Number of captures, turn the Rear scroll wheel to
choose the number of captures required: 2 – no limit
6) In Interval duration, turn the Rear scroll wheel to
choose:
2 seconds – 1 hour
7) Press SAVE.
8) Press ENTER again from the Interval screen to activate
the function. Press On. Note that this now reads O
and the line of text at the bottom of the screen reads
‘Interval on’.
Half-press the shutter release button to standby mode
for this function (press the shutter release button
again (full press) for activation) or full-press the shutter
release for immediate activation.
Tip
Check the lower text-row
on the screen for ON or OFF
status.
Number of captures
highlighted. 2 frames
variation chosen as
option.
Interval duration high-
lighted.
5 seconds variation
chosen as option.
MENU
ON
Front scroll
wheel
ENTER
or
NEXT
Rear scroll
wheel
options available
options available
EXAMPLE
Screen after Interval
setting activated indi-
cating 3 shots remain-
ing at 30 second inter-
vals.
Tip
An Interval setting can be
stopped mid-sequence by
pressing the ESC button.
Note
In Custom Options #28 on grip
you can select an initial delay
of None, 2, 10, 60 seconds or
the interval time.
To Next Page
Loading...
Need help?
General
