3.25 ACCESSORY CONNECTION
There are two accessory retaining screw threads (M5) as
well as a data bus connector on the left hand side of the
camera body, protected beneath a cover (1).
The cover can be removed by rst lifting the left hand edge
(1) a little and then sliding the cover to the left (2), as in the
illustration.
Lift the front edge of the cover rst (1).
3.26 PC FLASH CONNECTOR
A PC connector for non TTL ash synchronisation (3) is located
on the left side of the body. It is protected by a captive rubber
plug.
1
2
3
H6D www.hasselblad.com
To Next Page
Loading...
