Hasselblad H6D - Separate Flash Unit Connection

SEPARATE FLASH UNIT CONNECTION
Separate ash units can be electrically connected either by way
of the hot shoe accessory holder (see previous warnings) on the
top of the viewnder (1) or via a cord to the PC connection port
(2) on the left hand side of the camera body. Slave unit switches
/ transmitters can also be connected on unit the (see specic
user manuals for details).
Keep the plastic safety cover in place in the hot shoe (1) when
not in use.
H6D www.hasselblad.com
USER GUIDE
To Use
97
1 Hot Shoe
2 PC Connection Port
1
2