4.11 SET DRIVE MODE
There are two drive modes: Single drive and Continuous drive.
Long press on ISO button (D) toggles between Single drive and
Continuous drive mode. It can also be set from Main Menu or
Control Screen.
In Single mode, a capture is made when the shutter release
button is pressed and the camera is made ready for the next
capture.
To make the next capture however, you must rst release the
shutter release button and then press again.
In Continuous mode, the camera automatically makes captures
and makes ready for the next capture in a continuous
manner as long as you maintain pressure on the shutter
release.
Please note the speed is dependent on the time taken
to save the capture according to equipment.
A
Single drive
Continuous drive
H6D www.hasselblad.com
To Next Page
Loading...
