3.31 CHANGE LENS
ATTACH A LENS
1 Push the lens removal button (A) and remove
protection cover lid (B) from the camera body.
2 Rotate the lens so that the red mark on the lens (C)
lines up with the red mark (D) on the camera body.
3 Mount the lens into the camera body (E) and then
turn the lens clockwise to lock its position.
4 Make sure the lens is locked to the camera body
before using or moving the camera.
REMOVE A LENS
1 Hold the lens with one hand and hold the camera
body (E) still.
2 Push the lens removal button (A).
3 Rotate the lens counter clockwise.
4 Push the lens away from the camera body.
5 Attach the protection cover lid (B) on the camera
body directly.
6 Attach a lens protection lid on the detached lens to
prevent damage.
7 Store the lens with both lens protection lids on and
the lens hood (F) inverted over the lens instead of in
front of the lens.
A
B
C
D
E
F
H6D www.hasselblad.com
To Next Page
Loading...
