HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 8/58
Motors 4HP
Lamps
* Incandescent lamp load 3500W
Low-volt halogen lamps
* Inductive transformer 1800 W
* Electronic transformer 2000 W
* Halogen lamp 230 V 3500 W
Mercury-vapour lamp
* Uncompensated luminaire 2800 W
* Parallel compensated 2800 W
Fluorescent lamp T5 / T8
* Uncompensated luminaire 3500 W
* Parallel compensated 2000 W
* DUO lamp 2000 W
Dulux lamp
* Uncompensated luminaire 1500 W
* Parallel compensated 1500 W
Switching performance (contact)
* Max. peak inrush-current Ip (120 μs) 600 A
* Max. peak inrush-current Ip (240 μs) 480 A
* Max. peak inrush-current Ip (480 μs) 300 A
* Max. peak inrush-current Ip (1000 μs) 170 A
Application table
Type M/R4.16.1 M/R8.16.1 M/R12.16.1
Max. number of communication objects 90 170 250
Max. number of group addresses 254 254 254
Max. number of associations 254 254 254
Note: The programming requires the EIB Software Tools ETS2 V1.3 or ETS3.0 or ETS4.
If use ETS2 V1.3, then import "*.vd2". If use ETS3.0, then Import "*.vd3”.If use ETS4,the
import “.knxprod”
To Next Page
Loading...