19
(4.4) Adjusting Settings
To adjust the settings of a block in your rig, double-tap it to open its settings screen. You can adjust the settings
of any block (amp, cab, IR, clone, or effect), the input (the In/Lock icon), the output (the Out icon), or mix (the Mix
icon).
(4.4.1) Overview
Tap the Preset
menu to select a
preset.
Tap this icon to discard any
changes you’ve made since
opening this screen.
Tap the model name
to assign a different
model to this slot.
Tap to return to retain
your changes and return
to the main screen.
See (4.4.3)
Saving a Block
Preset.
Tap a button to
change a
parameter’s
setting.
Tap and slide a fader to
change a parameter’s
value.
Tap to change the color of the model. That color will be
shown on the main screen, in the Hardware Assign
screen, and in the footswitch indicator for this model.
Tap this icon to enter
the (4.6)
Hardware
Assign menu.
Turn encoder to move
through selectable
items onscreen or to
adjust parameters.
Press encoder as an
Enter command.
Tap the sliders
icon to open the
advanced block
edit page.
Tap Delete to
unassign the model
from the slot.
Tap the arrow
icon to return to
the first page of
settings.
These buttons
turn the model EQ
on/off and adjust
its settings.
This meter
displays the output
level of the block.
To Next Page
Loading...
