54
(4.18.7) Expression Pedal
The settings on this tab are for configuring an external
expression pedal connected to Flex Prime’s rear panel EXPR
input.
External Pedal: When set to On, the connected external
expression pedal will control the B set of parameters set
in Hardware Assign mode.
Note: When the External Pedal is On, the toe switch of the
internal pedal will only toggle the block assigned to the A
set of parameters on/off when the expression pedal
assignment is set to Classic mode, and it will do nothing
when the assignment is set to Advanced mode.
(4.18.8) Info
On this tab you can view Flex Prime’s current firmware and
hardware versions, and access Flex Prime’s License
information.
Send anonymous usage statistics: This determines
whether or not your usage statistics will be sent
occasionally to us, enabling us to improve the Flex Prime
experience.
Reset All Global Settings: Tap Reset to reset all your
global settings to their factory defaults
To Next Page
Loading...
