38
(4.11) Tuner
To access Flex Prime’s built-in guitar tuner, press and hold footswitch 3 for over one second.
Alternately, you can access the tuner by tapping the Menu icon in the top left of the Main
screen, and then tapping the Tuner icon.
As you play a string, the screen will show the nearest note, as well as how flat or sharp the guitar string is. If only a
green right arrow appears, your string is flat, and if only a green left arrow is shown, then your string is sharp. To
successfully tune the string, adjust your guitar’s tuners until both green arrows are lit.
The following parameters are available to be adjusted:
• Tuner Reference: Tap this parameter, then turn the main encoder to set the tuner’s reference frequency.
The default and most common setting for a guitar tuner is 440 Hz.
• Tempo: Tap this parameter to manually set the global tempo of Flex Prime using the main encoder. You
can alternately set this tempo by tapping footswitch 2 (Tempo).
Additionally, you can mute/unmute dry and unaffected guitar signal while on this screen by pressing footswitch 1
or tapping Mute.
To exit this page, press footswitch 3 or tap Exit.
To Next Page
Loading...
