HEADRUSH FLEX PRIME - Page 7

7
8. MIDI Input (1/8” [3.5 mm])
Use a Type A 1/8"-to-MIDI DIN adapter and a standard MIDI cable (not included) to connect this input to the
MIDI output of an optional external MIDI device.
9. MIDI Out/Thru (1/8” [3.5 mm])
Use a Type A 1/8"-to-MIDI DIN adapter and a standard MIDI cable (not included) to connect this output to the
MIDI input of an optional external MIDI device. You can set this output to be a standard MIDI output or MIDI
throughput in the (4.18.6) Global Settings > MIDI menu.
Important: Do not connect audio devices (e.g., headphones, monitors, etc.) to the MIDI Output or MIDI Input.
Use 1/8”-to-5-pin MIDI DIN adapters to connect MIDI devices only.
10. USB-B Port
Connect this USB port to a computer using a standard USB cable. This connection allows Flex Prime to send
and receive the digital audio signal to and from your computer. You can also use this connection to import or
export rigs, block presets, setlists, loops, clones, and tracks for the practice tool. See (4.15) USB for more
information.
11. Vent
Make sure this vent is unobstructed while using Flex Prime.
12. Power Input
Connect this input to a power outlet using the included power adapter.
13. Power Switch
Press this button to turn Flex Prime’s power on.
Always make sure your input devices are connected and your volume is at zero before powering on. Return
volume to zero when powering off.