Machine mode of operation | Machine data
4
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
103
Elements of machine data display
Protection zone monitoring
active
Protection zone monitoring not active
Position display for four axes: Display of position values for up to four axes
The displayed axes depend on the machine configuration.
Tool number display:
Tool number of the inserted tool
Tool compensation values
For all of the T displays:
T highlighted in color: Driven tool
Tool number or ID highlighted in color: Mirrored tool holder
Tool number with index: Multipoint tool
The letter X/Z of the compensation highlighted in color: Special
compensation is active in the X and Z direction
T ID display:
ID of the inserted tool
Tool compensation values
T ID display without compensation values:
ID of the inserted tool
Tool compensation:
Special compensation only for recessing tools or button tools
Special compensation value in gray: Special compensation is not active
The letter X/Z of the compensation highlighted in color: Special
compensation is active in the X and Z direction
Additive compensation:
Compensation values in gray: D compensation is not active
Compensation values in black: D compensation is active
Tool life information:
T:
Black = global tool life monitoring is on
White = global tool life monitoring is off
MT, RT active: Monitoring according to tool life
MZ, RZ active: Monitoring according to part quantity
All fields empty: Tool without tool-life monitoring
Slide display and cycle status:
Upper field: Setting of the override control
Lower field with white background: Actual feed rate
Lower field with gray background: Programmed feed rate with stationary
slide
Slide display and cycle status:
Upper field: Programmed feed rate
Lower field: Actual feed rate
To Next Page
Loading...
