Machine mode of operation | Tool measurement
4
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
135
Optical gauge
Refer to your machine manual.
Your machine manufacturer enables this function.
Finding the tool dimensions by using an optical gauge:
In the tool table, enter the tool you want to measure
Insert the tool and enter the tool number in the
TSF dialog
Press the Measure tool soft key
Press the Measure optical soft key
Position the tool at the cross hairs of the optical
gauge by using the axis keys or the handwheel
Save the tool dimension in Z
Save the tool dimension in X
For turning tools, enter the cutting edge radius
and load it into the tool table
To Next Page
Loading...
