Machine mode of operation | Machine data
4
98
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Machine-dependent variants of the TSF dialog
Machine operating panel with spindle change key
If the manufacturer has equipped your machine operating panel
with a spindle change key, specify per key for which spindle the
entries for S, D and A apply. The SP field displays the number of the
selected spindle in the TSF menu.
In the separateTSFDlg (604906) machine parameter, you
can define how you want the TSF dialog to be displayed
on machines with turrets:
TSF dialog with input of all cutting data
Separate dialogs for T, S and F
For machines with tool magazine, separate dialogs are
automatically available in the TSF menu.
Machine operating panel without spindle change key
For machines with only one main spindle the entries S, D and A
always apply to the main spindle.
For machines with one main spindle and one tool spindle, the
entries, depending on the inserted tool, apply to the main or tool
spindle:
Without driven tool: The parameters S, D and A apply to the
main spindle
With driven tool: The parameters S, D and A apply to the
selected spindle
Machine with counter spindle and/or B axis
Depending on the machine design, the TSF dialog may contain
further information for controlling a counter spindle and/or B axis.
Additional cycle parameter with counter spindle:
WP: No. of spindle (machine-dependent)
Additional cycle parameter with B axis:
BW: Angle in the B axis (machine-dependent)
CW: Reverse the tool (machine-dependent)
HC: Shoe brake (machine-dependent)
DF: Miscellaneous function (machine-dependent)
To Next Page
Loading...
