Machine mode of operation | Machine data
4
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
97
Soft keys for Set T, S, F
Further information: "Tool compensation",
Page 136
Further information: "Touch-off", Page 133
Call tool list or turret list
Further information: "Pocket table setup",
Page 108
Transfer of cutting speed and feed rate from the
technology data
On: Feed per minute (mm/min)
Off: Programmed feed rate per revolution (mm/
rev)
On: Constant speed (rpm)
Off: Constant surface speed (m/min)
To Next Page
Loading...
