Graphic simulation | Dimensioning
7
550
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
7.8 Dimensioning
Measuring the generated contour in Simulation
submode
You can measure a contour generated in Simulation submode or
have the dimensions used during programming displayed.
Measuring a contour:
Press the Miscellaneous functions soft key
Select the Misc menu item
Select the Dimensioning menu item
You have the following possibilities:
Element dimensioning
Point dimensioning
Setting a datum
Dimensioning soft keys
Element forward
Element back
Select Next contour group (only active with
multiple contour groups)
Select Next contour
Select Previous contour
To Next Page
Loading...
