Teach-in | Turning cycles
5
212
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
HC: Shoe brake (machine-dependent)
DF: Miscellaneous function (machine-dependent)
Type of machining for technology database access:
Finishing
Cycle run:
1
Move in transverse direction from the Start point to the Start
point contour X1, Z1
2
Finish the contour area from the Start point contour X1, Z1
to the End point contour X2, Z2, taking the optional contour
elements into account
3
Move to the Tool change point according to the setting in G14
To Next Page
Loading...
