Teach-in | Turning cycles
5
230
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
WP: No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW: Angle in the B axis (machine-dependent)
CW: Reverse the tool (machine-dependent)
HC: Shoe brake (machine-dependent)
DF: Miscellaneous function (machine-dependent)
Type of machining for technology database access:
Finishing
Cycle run:
1
Move on paraxial path from Start point to Start point contour
X1, Z1
2 Finish the defined contour area, taking the optional contour
elements into account
3
Move to the Tool change point according to the setting in G14
To Next Page
Loading...
