ICP programming | Editing ICP contours
6
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
443
Shifting a contour
Shifting a contour:
Select the Manipulate menu item
The menu displays functions for trimming,
editing and deleting contours
Select the Modify menu item
Select the Contour element menu item
Select the contour element to be edited
Present the selected contour element for shifting
Enter the new Start point of the reference
element
Load the new Start point (= new position)
The control displays the shifted contour
Confirm the new position for the contour
Transformations – Shifting
With this function, you can move a contour by entering incremental
or absolute coordinates.
Parameters:
X: Target point
Z: Target point
Xi: Target point (incremental)
Zi: Target point (incremental)
H: Master (only for C-axis contours)
0: Delete: Master contour is deleted
1: Copy: Master contour is retained
ID: Contour (only for C-axis contours)
To Next Page
Loading...
