Graphic simulation | Zooming function in simulation
7
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
545
Modifying the displayed detail by using keys
You can use the following keys to change the displayed detail
without opening the zoom menu.
Keys for modifying the displayed detail
The arrow keys move the workpiece in the
indicated direction
Reduce the displayed workpiece (zoom –)
Magnify the displayed workpiece (zoom +)
Modifying the detail with the zoom menu
When you activate the zoom menu, a red frame is shown in the
simulation window. This red frame indicates the zoom area, which
you can select using the Apply soft key or the Ent key. Use the
following keys to change the frame size and position.
Keys for modifying the displayed detail
The arrow keys move the red frame in the
indicated direction
Reduce the size of the red frame
Increase the size of the red frame
To Next Page
Loading...
