Organization mode of operation | Parameters
9
640
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Measuring
Measuring – Measurement procedure
The measuring parameters are assigned to the fit elements as an
attribute.
Measurement procedure
Parameter Meaning
Measuring loop counter MC
Defines the measurement/loop
intervals
Measuring path length in Z MLZ
Distance in Z for departure
movement
Measuring path length in X MLX
Distance in X for departure
movement
Measuring oversize MA
Oversize still applied to the
element to be measured
Measuring cut length MSL
To Next Page
Loading...
