Organization mode of operation | Transfer submode
9
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
665
Tool backup data
When creating a tool backup, you can choose whether to save the
data of specific tools or all tools. Select the desired tools in the tool
list or turret list.
Selecting the tools for tool backup:
Press the Backup tools soft key
Press the Tool list soft key
Alternative: Press the Turret list soft key
Alternative: Press the Magazine list soft key
(machine-dependent)
Press the Mark soft key
Press the Confirm selection soft key
The control shows a selection window. Here you can define which
tool data you want to save.
Selection for the content of backup files:
Tools
Tool texts
Technology data
Touch probes
Tool holders
Path and file names of the backup files: \bck\tool\TO_*.zip
Press the Transmit or Receive soft key to start transferring the
files.
When restoring backup data, all available backup files are displayed.
With the Tool list soft key, you can select individual tools from a
backup file.
Choose the tool data you want to restore from the backup file.
To Next Page
Loading...
