Tables and overviews | Syntax elements provided by the control
10
710
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
B-axis and Y-axis machining
G16 Tilting working plane
✓
G17 XY plane (front or rear face)
✓
G18 XZ plane (turning)
✓
Working planes
G19 YZ plane (plan view / lateral surface)
✓
G0 Positioning at rapid traverse
✓
G14 Move to the tool change position
✓
G600 Preselect tool
✓
G701 Rapid traverse to machine coordinates
✓
G714 Insert magazine tool
◆
Tool positioning without machining
G712 Define tool position
◆
G841 Area milling, roughing
✓
G842 Area milling, finishing
✓
G843 Centric polygon milling, roughing
✓
G844 Centric polygon milling, finishing
✓
G845 Pocket milling, roughing
✓
G846 Pocket milling, finishing
✓
G800 Thread milling in XY plane
✓
G806 Thread milling in YZ plane
✓
G803 Engraving in XY plane
✓
G804 Engraving in YZ plane
✓
Milling cycles
G808 Hobbing
✓
G1 Linear path
✓
G2 Circular arc with incremental center coordi-
nates
✓
G3 Circular arc with incremental center coordi-
nates
✓
G12 Circular arc with absolute center coordi-
nates
✓
Simple linear and circular movements
G13 Circular arc with absolute center coordi-
nates
✓
To Next Page
Loading...
