Basics of operation | TURNguide context-sensitive help
2
78
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Navigating in the TURNguide
It's easiest to use the mouse to navigate in the TURNguide. A table
of contents appears on the left side of the screen. By clicking the
rightward pointing triangle you open subordinate sections, and by
clicking the respective entry you open the individual pages. It is
operated in the same manner as the Windows Explorer.
Linked text positions (cross references) are shown underlined and
in blue. Clicking the link opens the associated page.
Of course you can also operate the TURNguide through keys
and soft keys. The following table contains an overview of the
corresponding key functions.
The key functions described below are available only
on the control hardware, and not on the programming
station.
Operating
element
Function
If the table of contents at the left is
active: Select the entry above or below
the current one.
If the text window at right is active:
Move the page downward or upward
if texts or graphics are not shown
completely
If the table of contents at the left is
active: Expand the current entry or, if it is
fully expanded, move to the window at
the right.
If the text window at right is active: No
function
If the table of contents at left is active:
Close a branch of the table of contents
If the text window at right is active: No
function
If the table of contents at the left is
active: Display the selected page.
If the text window at right is active: If
the cursor is on a link, jump to the linked
page
If the table of contents at left is active:
Switch the tab between the display of
the table of contents, display of the
subject index, and the full-text search
function and switching to the screen half
at right
If the text window at right is active: Jump
back to the window at left
To Next Page
Loading...
