MIRRORING (Cycle 8, DIN/ISO: G28) 10.5
10
HEIDENHAIN | TNC 320 | User’s manual for cycle programming | 9/2016
259
Please note while programming:
If you work in a tilted system with Cycle 8 the
following procedure is recommended:
First program the tilting movement and then call
Cycle 8 MIRRORING!
Cycle parameters
Mirror image axis?: Enter the axis to be mirrored.
You can mirror all axes except for the spindle axis
—including rotary axes—with the exception of the
spindle axis and its associated auxiliary axis. You can
enter up to three axes. Input range: Up to three NC
axes X, Y, Z, U, V, W, A, B, C
NC blocks
79 CYCL DEF 8.0 MIRRORING
80 CYCL DEF 8.1 X Y Z
To Next Page
Loading...
