HEIDENHAIN TNC 320 - Cycle Parameters

PROGRAM CALL (Cycle 12, DIN/ISO: G39) 11.3
11
HEIDENHAIN | TNC 320 | User’s manual for cycle programming | 9/2016
277
Cycle parameters
Program name: Enter the name of the program
you want to call and, if necessary, the directory it is
located in or
Activate the file select dialog with the SELECT soft
key and select the program to be called
Call the program with:
CYCL CALL (separate block) or
M99 (blockwise) or
M89 (executed after every positioning block)
Designate program 50 as a cycle and
call it with M99
55 CYCL DEF 12.0 PGM CALL
56 CYCL DE 12.1 PGM TNC:
\KLAR35\FK1\50.H
57 L X+20 Y+50 FMAX M99