COMPONENTS
2-1MS 3000 • 9095-032A
2. COMPONENT DESCRIPTION
2.1 General description
The basic set of the mast climbing work
platform with rack and pinion drive consists
of the following 5 main parts:
* drive
* masts
* platform fences
* chassis
* control system
The platform moves along the mast with
the aid of Nylontron rollers.
The motors are fitted with centrifugal
brakes which retard the platform if the
speed of descent is exceeded.
The platform is driven up and down the
mast by means of two electric motors
acting through a differential gearbox, each
motor having two pinions. The parallel
movement of the platform is controlled
automatically.
Much consideration has been given to
simple and safe assembly and
disassembly.
A crane on the platform (option) ensures
that the mast elements can be positioned
quickly and safely.
The platform can be adjusted to suit the
required working situation with the use of
separate platform elements. The width of
the platform can be adjusted by means of
outriggers.
Fig.2-1 Basic set MS3000
To Next Page
Loading...
Need help?
General