HEK MS 3000 - Safety after Use; Built-In and Additional Safety Features

SAFETY
3-3MS 3000 • 9095-032A
3.4 Safety after use
- Transport on public roads must only be
done with a truck intended for the
purpose.
- The platform must be placed in the
lowest position and the main switch
must be secured.
3.5 Built-in and additional safety
features
The MS3000 mast climbing work platform
is provided with the following in-built and
additional safety features:
- Phase control relay in the control box.
- "Emergency stop" push button on the
control box.
- Electrical access protection.
- In the event of a power failure the motor
brakes are operated automatically to
prevent the platform descending
unexpectedly.
- Centrifugal brakes ensure a controlled
descent in the event of an emergency.
- The EMOS system locks the platform if
the system is overloaded.
- In the event of a power failure it is
possible for the platform to make an
emergency descent by manually
releasing the motor brakes.
- Audio Visual Warning. During descent
of the platform, a buzzer will sound and
a light will flash underneath the platform.